Coated lumbers would definately fall into the "building better" category. In this article reposted from the Ottawa Citizen, Mike talks about why coated lumbers are the way to go when building. The two types I see Mike using on his shows are Pinkwood a Canadian product out of western Canada which is coated with a pink fire retardant coating designed to produce an endothermic heat absorbing reaction when exposed to flames.
The other coated lumber Mike uses on his shows is Bluwood an American product which is coated with a distinctive blue coating that is mold, moisture, and insect resistant. Bluwood resists rot and termite damage, so in a damp climate or a basement, Bluwood is the way to go. Both Bluwood and Pinkwood are above minimum code, but necessary in Mike's eyes. The type of coated lumber you choose will be determined by the environment your house is in. Coated lumbers provide many benefits that address environmental health and safety concerns.
Some are even fire retardant. I use them whenever I can on any job. They deliver benefits that meet environmental and safety standards that are important to me, to homeowners, to builders and to industry pros. Is it above code?
Is it unnecessary? Not in my world. Building to minimum code is just that — minimum. And how safe is too safe? These things change all the time. It took 20 years for the rules to come full circle and prevent people from getting shocked if they plugged in something in the kitchen after washing dishes. Not a single one was shipping to Seattle, and it took me several months to convince the first one to give it a try.
The interior of BC is much like Eastern Washington: hot summers and frozen winters. The primary softwood species that grows there are grouped as SPF: Engelmann spruce, lodgepole pine, and balsam fir. They are slow-growing, have small branches, and lose the bottom branches quickly as they race skyward to compete for summer sun.
What this means for the mills is that the lumber is tight-grained tends to be straight and has small knots. Also, because the creamy texture and consistent light color is so popular in Japan, the mills learned early on to produce as much defect-free lumber as possible because the overseas market would pay for the quality. In the U. Mike Holmes stated: "It also helps reduce the spread of flames in case of fire.
That's smart. As a builder, it makes sense to use PinkWood. What is a purple stud? Distinctive purple studs known for straightness and stability. Made of Southern Yellow Pine for strength, machinability and great fastener-holding characteristics.
Recommended for most general construction projects including framing, houses, barns and sheds. What kind of wood is pink? Pink Ivory Overview Pink Ivory is an exotic wood native to Southern Africa, and is one of the most rare and beautiful woods in the world.
It is a very hard wood, strong and stiff, with a fine texture. Although difficult to work with hand tools, Pink Ivory is excellent for wood turning and carving. Where is the blue wood in lumber tycoon 2? It was added during the January Mega Update, along with the other features added in the update.
Is pressure treated wood resistant to termites? Pressure-treated wood is resistant to termites, but make sure that there's no contact with soil. Pressure-treated wood is wood that has had a chemical preservative forced into the pores to form a barrier that resists decay and wood-eating insects like termites and carpenter ants.
How do you know if you have pine beetles? How do I know if my trees have pine beetles? What are the symptoms? Beetles millimeters in length.
0コメント